dmesg - 2014-01-15 01:43
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.23.1.el6.x86_64 (mockbuild@c6b5.bsys.dev.centos.org) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Mon Jun 18 18:58:52 BST 2012
Command line: initrd=initrd0.img root=live:CDLABEL=SLI20_A02 rootfstype=auto ro liveimg quiet rhgb vga=791 rd_NO_LUKS rd_NO_MD rd_NO_DM BOOT_IMAGE=vmlinuz0
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
BIOS-e820: 0000000040200000 - 00000000da4e6000 (usable)
BIOS-e820: 00000000da4e6000 - 00000000da529000 (ACPI NVS)
BIOS-e820: 00000000da529000 - 00000000da794000 (usable)
BIOS-e820: 00000000da794000 - 00000000da967000 (reserved)
BIOS-e820: 00000000da967000 - 00000000daba9000 (usable)
BIOS-e820: 00000000daba9000 - 00000000dad68000 (reserved)
BIOS-e820: 00000000dad68000 - 00000000dafe8000 (ACPI NVS)
BIOS-e820: 00000000dafe8000 - 00000000db000000 (ACPI data)
BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000011fe00000 (usable)
DMI 2.6 present.
SMBIOS version 2.6 @ 0xF0440
DMI: Dell Inc. Vostro 3550/0JGC48, BIOS A07 07/18/2011
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FE0000000 write-back
2 base 0DB800000 mask FFF800000 uncachable
3 base 0DC000000 mask FFC000000 uncachable
4 base 0E0000000 mask FE0000000 uncachable
5 base 11FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 512MB, type WB
reg 2, base: 3512MB, range: 8MB, type UC
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 3584MB, range: 512MB, type UC
reg 5, base: 4606MB, range: 2MB, type UC
total RAM covered: 4022M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3512MB, range: 8MB, type UC
reg 4, base: 3520MB, range: 64MB, type UC
reg 5, base: 4GB, range: 512MB, type WB
reg 6, base: 4606MB, range: 2MB, type UC
e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdaba9 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000daba9000
0000000000 - 00daa00000 page 2M
00daa00000 - 00daba9000 page 4k
kernel direct mapping tables up to daba9000 @ 8000-e000
init_memory_mapping: 0000000100000000-000000011fe00000
0100000000 - 011fe00000 page 2M
kernel direct mapping tables up to 11fe00000 @ c000-12000
RAMDISK: 1ecf2000 - 1ffdea1d
ACPI: RSDP 00000000000f0410 00024 (v02 DELL)
ACPI: XSDT 00000000dafe8078 0006C (v01 DELL WN09 01072009 AMI 00010013)
ACPI: FACP 00000000daff1c98 000F4 (v04 DELL WN09 01072009 AMI 00010013)
ACPI: DSDT 00000000dafe8170 09B22 (v02 DELL WN09 00000000 INTL 20051117)
ACPI: FACS 00000000dafe3f80 00040
ACPI: APIC 00000000daff1d90 00072 (v03 DELL WN09 01072009 AMI 00010013)
ACPI: MCFG 00000000daff1e08 0003C (v01 DELL WN09 01072009 MSFT 00000097)
ACPI: SSDT 00000000daff1e48 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
ACPI: SLIC 00000000daff22f8 00176 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: HPET 00000000daff2470 00038 (v01 DELL WN09 01072009 AMI. 00000004)
ACPI: SSDT 00000000daff24a8 0090C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000daff2db8 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: OSFR 00000000daff3750 00086 (v01 DELL M08 07DB0712 ASL 00000061)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000011fe00000
Bootmem setup node 0 0000000000000000-000000011fe00000
NODE_DATA [000000000000d000 - 0000000000040fff]
bootmap [0000000000041000 - 0000000000064fbf] pages 24
(8 early reservations) ==> bootmem [0000000000 - 011fe00000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000200c864] TEXT DATA BSS ==> [0001000000 - 000200c864]
#3 [001ecf2000 - 001ffdea1d] RAMDISK ==> [001ecf2000 - 001ffdea1d]
#4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
#5 [000200d000 - 000200d1a9] BRK ==> [000200d000 - 000200d1a9]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
found SMP MP-table at [ffff8800000fd220] fd220
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88002c600000-ffff88002fffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0011fe00
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000001 -> 0x0000009d
0: 0x00000100 -> 0x00020000
0: 0x00020200 -> 0x00040000
0: 0x00040200 -> 0x000da4e6
0: 0x000da529 -> 0x000da794
0: 0x000da967 -> 0x000daba9
0: 0x00100000 -> 0x0011fe00
On node 0 totalpages: 1024815
DMA zone: 56 pages used for memmap
DMA zone: 106 pages reserved
DMA zone: 3834 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 875979 pages, LIFO batch:31
Normal zone: 1785 pages used for memmap
Normal zone: 128775 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000da4e6000 - 00000000da529000
PM: Registered nosave memory: 00000000da794000 - 00000000da967000
PM: Registered nosave memory: 00000000daba9000 - 00000000dad68000
PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
PM: Registered nosave memory: 00000000db000000 - 00000000db800000
PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88002c200000 s92632 r8192 d22056 u524288
pcpu-alloc: s92632 r8192 d22056 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1008588
Policy zone: Normal
Kernel command line: initrd=initrd0.img root=live:CDLABEL=SLI20_A02 rootfstype=auto ro liveimg quiet rhgb vga=791 rd_NO_LUKS rd_NO_MD rd_NO_DM BOOT_IMAGE=vmlinuz0
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880024000000 - ffff880028000000
software IO TLB at phys 0x24000000 - 0x28000000
Memory: 3937000k/4716544k available (5086k kernel code, 617284k absent, 162260k reserved, 7227k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:440
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2095.301 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.60 BogoMIPS (lpj=2095301)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20793 entries in 82 pages
x2apic not enabled, IRQ remapping init failed
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (16760.46 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10 64bit mmio: [0xf6800000-0xf6bfffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
pci 0000:00:16.0: reg 10 64bit mmio: [0xf7f0a000-0xf7f0a00f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xf7f08000-0xf7f083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7f00000-0xf7f03fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xf7f07000-0xf7f073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14 io port: [0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18 io port: [0xf090-0xf097]
pci 0000:00:1f.2: reg 1c io port: [0xf080-0xf083]
pci 0000:00:1f.2: reg 20 io port: [0xf060-0xf07f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7f06000-0xf7f067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7f05000-0xf7f050ff]
pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
pci 0000:05:00.0: reg 10 io port: [0xe000-0xe0ff]
pci 0000:05:00.0: reg 18 64bit mmio pref: [0xf1104000-0xf1104fff]
pci 0000:05:00.0: reg 20 64bit mmio pref: [0xf1100000-0xf1103fff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf1100000-0xf11fffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xf7e00000-0xf7e01fff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.3: bridge 32bit mmio: [0xf7e00000-0xf7efffff]
pci 0000:0b:00.0: reg 10 64bit mmio: [0xf7d00000-0xf7d01fff]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:00:1c.4: bridge 32bit mmio: [0xf7d00000-0xf7dfffff]
pci 0000:00:1c.7: bridge io port: [0xc000-0xdfff]
pci 0000:00:1c.7: bridge 32bit mmio: [0xf6c00000-0xf7cfffff]
pci 0000:00:1c.7: bridge 64bit mmio pref: [0xf0000000-0xf10fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x19) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:04: ioport range 0x680-0x69f has been reserved
system 00:04: ioport range 0x1000-0x100f has been reserved
system 00:04: ioport range 0xffff-0xffff has been reserved
system 00:04: ioport range 0xffff-0xffff has been reserved
system 00:04: ioport range 0x400-0x453 has been reserved
system 00:04: ioport range 0x458-0x47f has been reserved
system 00:04: ioport range 0x500-0x57f has been reserved
system 00:04: ioport range 0x164e-0x164f has been reserved
system 00:06: ioport range 0x454-0x457 has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: iomem range 0xfe800000-0xfe802fff has been reserved
system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0b: iomem range 0xfed10000-0xfed17fff has been reserved
system 00:0b: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:0b: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:0b: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0b: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:0b: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0b: iomem range 0xff000000-0xffffffff has been reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0b: iomem range 0xdfa00000-0xdfa00fff has been reserved
system 00:0d: iomem range 0x20000000-0x201fffff has been reserved
system 00:0d: iomem range 0x40000000-0x401fffff has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 05-06]
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.1: bridge window [0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem disabled]
pci 0000:00:1c.1: bridge window [0xf1100000-0xf11fffff]
pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.3: bridge window [io disabled]
pci 0000:00:1c.3: bridge window [0xf7e00000-0xf7efffff]
pci 0000:00:1c.3: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.4: bridge window [io disabled]
pci 0000:00:1c.4: bridge window [0xf7d00000-0xf7dfffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 11-16]
pci 0000:00:1c.7: PCI bridge, secondary bus 0000:11
pci 0000:00:1c.7: bridge window [0xc000-0xdfff]
pci 0000:00:1c.7: bridge window [0xf6c00000-0xf7cfffff]
pci 0000:00:1c.7: bridge window [0xf0000000-0xf10fffff]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
pci_bus 0000:05: resource 2 pref mem [0xf1100000-0xf11fffff]
pci_bus 0000:09: resource 1 mem: [0xf7e00000-0xf7efffff]
pci_bus 0000:0b: resource 1 mem: [0xf7d00000-0xf7dfffff]
pci_bus 0000:11: resource 0 io: [0xc000-0xdfff]
pci_bus 0000:11: resource 1 mem: [0xf6c00000-0xf7cfffff]
pci_bus 0000:11: resource 2 pref mem [0xf0000000-0xf10fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19378k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1389749592.907:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7727
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key CA2975F3E810BFBE
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.7: irq 25 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.7:pcie874: HPC vendor_id 8086 device_id 1c1e ss_vid 0 ss_did 0
pciehp 0000:00:1c.7:pcie874: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: Slot 1 already registered by another hotplug driver
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 3072k, total 65472k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000dad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 00000000dad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000dad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (58 C)
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
crash memory driver: version 1.1
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input4
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ACPI: Battery Slot [BAT0] (battery present)
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2014-01-15 01:33:13 UTC (1389749593)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1756k freed
dracut: dracut-004-256.el6_2.1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: root was live:/dev/disk/by-label/SLI20_A02, liveroot is now live:CDLABEL=SLI20_A02
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 26 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.4: new full speed USB device using ehci_hcd and address 3
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
usb 1-1.4: New USB device found, idVendor=8086, idProduct=0189
usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1.4: configuration #1 chosen from 1 choice
checking generic (e0000000 3ff0000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device
usb 1-1.5: new high speed USB device using ehci_hcd and address 4
Refined TSC clocksource calibration: 2095.240 MHz.
Switching to clocksource tsc
usb 1-1.5: New USB device found, idVendor=1bcf, idProduct=2809
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
usb 1-1.5: Manufacturer: cn01mwm972487162m58ka00
usb 1-1.5: configuration #1 chosen from 1 choice
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
acpi device:33: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
usb 2-1.3: new full speed USB device using ehci_hcd and address 3
usb 2-1.3: New USB device found, idVendor=138a, idProduct=0011
usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 2-1.3: SerialNumber: 26b3b78e743a
usb 2-1.3: configuration #1 chosen from 1 choice
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ACPI: WMI: Mapper loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 27
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 27
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: ST9750420AS, 0001DEM1, max UDMA/133
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9750420AS 0001 PQ: 0 ANSI: 5
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ACPI _SDD failed (AE 0x5)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ACPI _SDD failed (AE 0x5)
ata5.00: ACPI: failed the second time, disabled
ata5.00: ATAPI: PLDS DVD+/-RW DS-8A5SH, XD13, max UDMA/100, ATAPI AN
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A5SH XD13 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: unknown MAC, using family default
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
r8169 0000:05:00.0: irq 28 for MSI/MSI-X
eth0: RTL8168b/8111b at 0xffffc900050ae000, 18:03:73:79:f3:b8, XID 0c200000 IRQ 28
sr0: scsi3-mmc drive: 31x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/live-rw
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1389749609.720:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
input: HDA Intel PCH Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
udev: renamed network interface eth0 to p1p1
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0xf040-0xf05f] conflicts with ACPI region SMBI [0xf040-0xf04f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
platform microcode: firmware: requesting intel-ucode/06-2a-07
Microcode Update Driver: v2.00 , Peter Oruba
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
microcode: CPU0 updated to revision 0x1b, date = 2011-07-14
microcode: CPU1 updated to revision 0x1b, date = 2011-07-14
microcode: CPU2 updated to revision 0x1b, date = 2011-07-14
microcode: CPU3 updated to revision 0x1b, date = 2011-07-14
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (1bcf:2809)
input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
xhci_hcd 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:0b:00.0: setting latency timer to 64
xhci_hcd 0000:0b:00.0: xHCI Host Controller
xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7d00000
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:0b:00.0: irq 30 for MSI/MSI-X
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:0b:00.0: irq 31 for MSI/MSI-X
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:0b:00.0: irq 32 for MSI/MSI-X
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:0b:00.0: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:0b:00.0: irq 34 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:0b:00.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:0b:00.0: xHCI Host Controller
xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:0b:00.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
cfg80211: Calling CRDA to update world regulatory domain
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwlagn 0000:09:00.0: setting latency timer to 64
iwlagn 0000:09:00.0: Detected 6000 Series 1x2 BGN Gen2b, REV=0xB0
iwlagn 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6
iwlagn 0000:09:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
iwlagn 0000:09:00.0: irq 35 for MSI/MSI-X
iwlagn 0000:09:00.0: firmware: requesting iwlwifi-6000g2b-5.ucode
iwlagn 0000:09:00.0: loaded firmware version 17.168.5.2 build 35905
phy0: Selected rate control algorithm 'iwl-agn-rs'
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
fuse init (API version 7.13)
Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.00-0 (2011/06/13)
dca service started, version 1.12.1
Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k
Copyright (c) 2007-2011 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.4.8-k
ixgbe: Copyright (c) 1999-2011 Intel Corporation.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
TECH PREVIEW: FCOE Target support may not be fully supported.
Please review provided documentation for limitations.
TARGET_CORE[0]: Loading Generic Kernel Storage Engine: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.32-220.23.1.el6.x86_64
TARGET_CORE[0]: Initialized ConfigFS Fabric Infrastructure: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.32-220.23.1.el6.x86_64
TCM: Registered subsystem plugin: rd_dr struct module: (null)
TCM: Registered subsystem plugin: rd_mcp struct module: (null)
CORE_HBA[0] - TCM Ramdisk HBA Driver v4.0 on Generic Target Core Stack v4.0.0-rc7-ml
CORE_HBA[0] - Attached Ramdisk HBA: 0 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024
CORE_HBA[0] - Attached HBA to Generic Target Core
RAMDISK: Referencing Page Count: 8
CORE_RD[0] - Built Ramdisk Device ID: 0 space of 8 pages in 1 tables
rd_dr: Using SPC_PASSTHROUGH, no reservation emulation
rd_dr: Using SPC_ALUA_PASSTHROUGH, no ALUA emulation
Vendor: LIO-ORG Model: RAMDISK-DR Revision: 4.0
Type: Direct-Access ANSI SCSI revision: 05
CORE_RD[0] - Added TCM DIRECT Ramdisk Device ID: 0 of 8 pages in 1 tables, 32768 total bytes
TCM: Registered subsystem plugin: pscsi struct module: ffffffffa072aee0
TCM: Registered subsystem plugin: fileio struct module: ffffffffa07337c0
TCM: Registered subsystem plugin: iblock struct module: ffffffffa073a880
r8169: p1p1: link down
ADDRCONF(NETDEV_UP): p1p1: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
nfsd: last server has exited, flushing export cache
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
readahead-collector: sorting
readahead-collector: finished
hda-intel: Invalid position buffer, using LPIB read method instead.
hda-intel: Invalid position buffer, using LPIB read method instead.
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
r8169 0000:05:00.0: p1p1: link up
ADDRCONF(NETDEV_CHANGE): p1p1: link becomes ready
p1p1: no IPv6 routers present